Spot away

Spotaway is specially formulated to remove and prevent Osmosis black spot in fiberglass pools. Our highly concentrated formula is highly effective with results seen within a week of treatment. Depending on the age of your pool and the severity of the stain it is common for the problem to reoccur, so regular or repeated treatment may be necessary.

GENERAL INSTRUCTIONS

Osmosis black spot on fiberglass pools should not be confused with algae black spot. These are two separate problems!!

1. DO NOT use the pool for at least 48 hours before adding Spotaway.
2. DO NOT add other chemicals or use any form of brominator or chlorinator during the treatment period.
3. Thoroughly flush the filtration system to achieve maximum circulation.
4. Add 4 kg of Spotaway per 50,000 liters of pool water and distribute evenly throughout the pool with the pump and filter running. Run the pump for 4-6 hours daily and for up to 7 days if the stain
   persists, a second treatment will be needed.
5. Add Lo-Chlor No More Metal 24 hours after the initial treatment, as the metals that form the stain are in solution and must be removed from the water by filtration. Treat the pool with No More Metal on a regular basis to prevent recurrence stains as part of the maintenance program.
6. Occasionally the stain removal treatment can cause the water to become cloudy, if necessary use a suitable clarifying agent to help clear this problem.
7. After treating with clarifier let the pump and filter run for at least 24 hours, rinse the filter thoroughly and resume normal filtration.
8. This stain treatment lowers both pH and total alkalinity. After treatment, the pool water must be re-balanced and disinfected.
9. When rebalancing raise total alkalinity first. This should be done slowly over days (20 ppm maximum per day). A sharp increase will dissociate the metal ions from the solution resulting in re-staining.