Maxi Floc-Plus

Maxi-Floc Plus is a heavy-duty, fast-acting flocculant that restores clarity to even the murkiest pools. It is the fastest acting flocculant on the market, cleaning pools in less than 6 hours and removing even dead algae spores along with other floating particles. It leaves no dirty residue, can be used in all types of pools and is compatible with all known pool treatments.

GENERAL INSTRUCTIONS

1. Calculate the required volume of Maxi-Floc Plus from the table below.
2. Pre-dissolve the product in a clean plastic container.
3. Set the pool filter to RE-CIRCULATE mode. If this setting is not present, remove the filter cartridges or meshes before operating the filter.
4. Adjust the pH to 7.8 for best results.
5. Distribute evenly around the pool with the pump and filter running.
6. Run the pump for 1 to 2 hours and turn it off.
7. Leave the pool until all debris has settled (within six hours).
8. Vacuum for waste.
9. Replace filter cartridges or meshes where necessary.
10. Continue normal filtration and properly balance the pool water.